WEARtig Co 6 TIG Rods Importer, Stockist & Supplier Worldwide
Shanti Metal Supply Corporation (SMSC) welcomes enquiries for WEARtig Co 6 TIG Rods for industrial hardfacing requirements. Contact our team to discuss product identification, sizes, quantities, documentation and international supply enquiries.
Buyers searching for a WEARtig Co 6 TIG Rods importer, stockist, supplier or exporter can submit their requirements to SMSC. Confirm the product classification, base-material compatibility and welding procedure against the manufacturer's current technical datasheet before use.
Quick Answer: What Are WEARtig Co 6 TIG Rods?
WEARtig Co 6 TIG Rods are cobalt-alloy hardfacing rods intended for components exposed to metal-to-metal wear, cavitation and impact in corrosive environments. Published product information identifies the AWS A5.21 classification as ER CoCr-A and the EN 14700 classification as R Z Co2. The typical hardness of the pure weld deposit is 40–42 HRC.
Manufacturer documentation also describes applications involving erosion, pressure, abrasion and elevated heat up to 900°C, depending on the component and service conditions. Always verify the current datasheet and approved welding procedure before using the product in a production or critical-service application.
WEARtig Co 6 TIG Rods – Product Overview
WEARtig Co 6 is a cobalt-based hardfacing filler rod identified in product literature as UTP A Celsit 706 V. It is designed for wear protection where metal-to-metal contact, cavitation, impact and corrosive conditions are relevant considerations.
Published typical rod analysis lists 1.2% carbon, 27.0% chromium, 4.5% tungsten and cobalt as the balance. The published pure weld-deposit hardness is 40–42 HRC, with approximately 33 HRC reported at 500°C. These values are product references and should be verified against the current manufacturer datasheet.
SMSC welcomes enquiries from industrial fabricators, engineering companies, maintenance contractors, distributors and project procurement teams. Provide the required size, quantity, destination and technical requirements when requesting a quotation.
WEARtig Co 6 TIG Rods – Technical Specifications
| Property | Specification / Details |
|---|---|
| Product Name | WEARtig Co 6 TIG Rods |
| Alternative Designation | UTP A Celsit 706 V |
| Product Category | Cobalt-alloy TIG hardfacing rods |
| AWS Classification | ER CoCr-A under AWS A5.21 |
| EN Classification | R Z Co2 under EN 14700 |
| Typical Rod Analysis | C 1.2%, Cr 27.0%, W 4.5%, Co balance |
| Pure Weld-Deposit Hardness | 40–42 HRC |
| Hardness at 500°C | Approximately 33 HRC |
| Listed Sizes | 2.4 × 1000 mm, 3.2 × 1000 mm and 4.0 × 1000 mm |
| Current and Polarity | DC negative (DC−), as listed in product documentation |
| Shielding Gas | I1 / argon, as listed in product documentation |
| Supplier | Shanti Metal Supply Corporation (SMSC) |
WEARtig Co 6 – Classification and Standards
Published classification references identify WEARtig Co 6 as ER CoCr-A under AWS A5.21 and R Z Co2 under EN 14700. Product literature also identifies the product as UTP A Celsit 706 V. Confirm the complete designation on the product packaging and current technical datasheet before ordering.
| Verification Item | Reference |
|---|---|
| Product Designation | WEARtig Co 6 / UTP A Celsit 706 V |
| AWS Classification | ER CoCr-A, AWS A5.21 |
| EN Classification | R Z Co2, EN 14700 |
| Base-Material Compatibility | Check compatibility with the component material and approved welding procedure. |
| Inspection Documents | Confirm required certificates, batch traceability and inspection documents. |
WEARtig Co 6 – Chemical Composition
Published typical rod analysis for WEARtig Co 6 lists carbon, chromium, tungsten and cobalt. These figures are typical product references and must not be treated as batch-specific chemical certification.
| Element | Typical Analysis |
|---|---|
| Carbon (C) | 1.2% |
| Chromium (Cr) | 27.0% |
| Tungsten (W) | 4.5% |
| Cobalt (Co) | Balance |
WEARtig Co 6 – Mechanical Properties
The published pure weld-deposit hardness is 40–42 HRC. Product literature also gives a hardness reference of approximately 33 HRC at 500°C. Hardness and service performance should be interpreted using the manufacturer's test conditions and the actual operating environment.
| Property | Published Reference / Guidance |
|---|---|
| Pure Weld-Deposit Hardness | 40–42 HRC |
| Hardness at 500°C | Approximately 33 HRC |
| Gliding Characteristics | Described as excellent in product literature |
| Toughness | Described as high toughness in product literature |
| Polishability | Described as good in product literature |
| Magnetic Characteristics | Product literature describes the deposit as non-magnetic |
| Machining | Product literature references grinding and tungsten-carbide tools |
Welding Parameters and Operating Recommendations
Published guidance for WEARtig Co 6 specifies cleaning the welding area, preheating to 450–600°C and very slow cooling. These instructions must be reviewed against the current manufacturer datasheet, base material and qualified welding procedure before use.
| Parameter | Guidance |
|---|---|
| Welding Process | TIG / GTAW hardfacing rod |
| Current and Polarity | DC negative (DC−), as listed in product documentation |
| Shielding Gas | I1 / argon, as listed in product documentation |
| Surface Preparation | Clean the welding area thoroughly before welding. |
| Preheating | Published guidance: 450–600°C; confirm suitability for the base material and component. |
| Cooling | Published guidance calls for very slow cooling. Follow the current manufacturer's instructions. |
| Oxyacetylene Use | Product documentation describes an excess-acetylene / reducing flame for oxyacetylene welding; verify the current instructions before use. |
| Quality Checks | Complete inspection and testing required by the project specification. |
Applications of WEARtig Co 6
WEARtig Co 6 is described for hardfacing parts exposed to metal-to-metal wear, cavitation, impact and corrosive environments. Product documentation also lists applications involving erosion, pressure, abrasion and elevated heat up to 900°C, subject to component and service conditions.
- Fittings and valve components: Hardfacing of tight surfaces, valve seats and sealing faces.
- Combustion-engine components: Valve seats and cones where the design and procedure permit.
- Metal-to-metal sliding surfaces: Components requiring suitable wear resistance and gliding characteristics.
- Hot-working tools: Highly stressed tools where thermal shock is not expected.
- Pump and process equipment: Selected components exposed to cavitation, erosion or corrosive service.
- Milling, mixing and drilling tools: Components identified in manufacturer application guidance.
These examples do not mean the product is suitable for every operating environment. Confirm the actual wear mechanism, temperature, base material and repair method before specifying the consumable.
Base-Material Compatibility
Hardfacing selection should be based on the component material, its condition, design and service requirements. Confirm the manufacturer's recommendations before welding WEARtig Co 6 onto a specific base metal.
- Identify the base-metal grade and condition.
- Check whether the component is suitable for the specified preheat and cooling requirements.
- Review the approved welding procedure and applicable project code.
- Consider dilution, overlay thickness, machining and final surface requirements.
- Confirm inspection, traceability and certificate requirements before ordering.
Quality, Traceability and Documentation
For technical approval, buyers should review the current manufacturer datasheet and applicable product identification or batch documentation. State any project-specific certificate or inspection requirements in the enquiry and confirm availability before purchase.
- Current product technical datasheet.
- Product designation and classification confirmation.
- Batch identification and traceability, where applicable.
- Project-specific inspection or certification requirements.
- Confirmation of size, quantity and packaging.
Storage and Handling of TIG Welding Rods
Store welding rods in clean, dry conditions and protect them from moisture, oil, dust and other contamination. Keep products in their original labelled packaging until use and follow the manufacturer's storage and handling instructions. Check product identification before welding.
Why Contact Shanti Metal Supply Corporation?
Shanti Metal Supply Corporation (SMSC) welcomes enquiries for WEARtig Co 6 TIG Rods from industrial customers, maintenance contractors, fabricators, engineering firms and distributors. Contact SMSC to discuss availability, product identification, quantities, documentation and destination requirements.
- Product enquiries for WEARtig Co 6 TIG Rods.
- Quotation enquiries based on required diameters and quantities.
- Discussion of applicable technical documentation.
- Bulk and industrial procurement enquiries.
- International supply enquiries for project requirements.
WEARtig Co 6 Supplier for Worldwide Markets
SMSC welcomes international enquiries for WEARtig Co 6 TIG Rods from industrial procurement teams, engineering companies, welding contractors and distributors. Provide the product designation, requested quantity, destination and technical requirements so the enquiry can be reviewed.
WEARtig Co 6 TIG Rods Supplier in the United Arab Emirates
Buyers searching for a WEARtig Co 6 TIG Rods supplier in the UAE, Dubai, Abu Dhabi, Sharjah and other industrial locations can contact SMSC with their product requirements. Confirm product availability, documentation and delivery arrangements for the destination.
WEARtig Co 6 TIG Rods Supplier in Saudi Arabia
Industrial buyers in Riyadh, Jeddah, Dammam and other Saudi Arabian locations can submit enquiries for cobalt-alloy hardfacing TIG rods. Include the required size, quantity and technical requirements.
WEARtig Co 6 TIG Rods Supplier in Qatar
Procurement teams in Doha and other locations in Qatar can contact SMSC for product enquiries, availability checks and quotation requests.
WEARtig Co 6 TIG Rods Supplier in Oman
Buyers in Muscat, Sohar, Salalah and other locations in Oman can send product enquiries with the complete designation, required quantity and delivery destination.
WEARtig Co 6 TIG Rods Supplier in Kuwait
Industrial buyers in Kuwait can request product availability and quotation information for WEARtig Co 6 TIG Rods, subject to confirmation of the current product data and supply arrangements.
WEARtig Co 6 TIG Rods Supplier in Bahrain
Buyers in Manama, Sitra, Hidd and other industrial locations in Bahrain can contact SMSC with their product specifications, quantities and delivery requirements.
WEARtig Co 6 TIG Rods Supplier in Indonesia
Industrial procurement teams and welding distributors in Indonesia can enquire about WEARtig Co 6 TIG Rods and provide their size, quantity, documentation and shipping requirements.
WEARtig Co 6 TIG Rods Supplier in Malaysia
Buyers in Kuala Lumpur, Selangor, Johor and other industrial locations in Malaysia can contact SMSC for product enquiries and quotation requests.
WEARtig Co 6 TIG Rods Supplier in Singapore and Asia-Pacific
Enquiries are also welcome from Singapore, Thailand, Vietnam, the Philippines and other Asia-Pacific markets. Confirm availability, product documentation and delivery arrangements with SMSC.
WEARtig Co 6 TIG Rods Supplier for Europe, Africa and the Americas
SMSC welcomes international enquiries from Europe, Africa, Australia, New Zealand, North America, South America and other markets. Supply is subject to confirmation of availability, shipping arrangements and applicable import requirements.
How to Request a Quotation
To help SMSC review your WEARtig Co 6 TIG Rods requirement, provide the following details:
- Complete product designation: WEARtig Co 6 / UTP A Celsit 706 V.
- Required rod diameter and length.
- Required quantity.
- Destination country and delivery location.
- Base-metal grade and intended application.
- Applicable specification and required certificates.
Contact SMSC at info@shantimetalsupply.com or use the website contact page to discuss your requirement.
Frequently Asked Questions About WEARtig Co 6 TIG Rods
1. What are WEARtig Co 6 TIG Rods?
WEARtig Co 6 is a cobalt-alloy TIG hardfacing rod intended for resistance to metal-to-metal wear, cavitation and impact in corrosive environments.
2. What is the AWS classification of WEARtig Co 6?
The published AWS A5.21 classification is ER CoCr-A. Verify the supplied product against the current manufacturer datasheet.
3. What is the EN classification of WEARtig Co 6?
The published EN 14700 classification is R Z Co2. Confirm the current product datasheet and packaging before procurement.
4. What is the hardness of WEARtig Co 6?
The published hardness of the pure weld deposit is 40–42 HRC. Product literature also gives approximately 33 HRC at 500°C.
5. What is the typical chemical composition?
Published typical rod analysis lists 1.2% carbon, 27.0% chromium, 4.5% tungsten and cobalt as the balance. Confirm the current datasheet for exact values and tolerances.
6. Which sizes are listed?
Published product documentation lists 2.4 × 1000 mm, 3.2 × 1000 mm and 4.0 × 1000 mm. Confirm current availability with SMSC.
7. Which applications are listed for WEARtig Co 6?
Published guidance includes hardfacing for components exposed to metal-to-metal wear, cavitation, impact and corrosive environments, including selected fittings, valve seats, sliding surfaces and hot-working tools.
8. What information is required for a quotation?
Provide the complete designation, required diameter, quantity, destination, intended application and any applicable specification or certification requirements.
9. Can I enquire about international supply?
SMSC welcomes enquiries from the UAE, Saudi Arabia, Qatar, Oman, Kuwait, Bahrain, Indonesia, Malaysia and other international markets. Availability and delivery must be confirmed for each order.
10. How should the rods be stored?
Keep rods clean, dry and protected from contamination. Follow the manufacturer's storage, handling, preheating and cooling instructions.
Contact SMSC for WEARtig Co 6 TIG Rods
Shanti Metal Supply Corporation welcomes enquiries from industrial buyers, maintenance contractors, fabricators, engineering firms and distributors. Contact SMSC to discuss WEARtig Co 6 TIG Rods, quantities, technical documentation and worldwide supply enquiries.