UTP A 2133 Mn TIG Rods Importer, Stockist & Supplier Worldwide
Shanti Metal Supply Corporation (SMSC) welcomes industrial enquiries for UTP A 2133 Mn TIG Rods. Our welding consumables enquiries serve industrial buyers, fabrication companies, welding contractors, engineering firms, distributors and project procurement teams in India, the Middle East and other international markets.
Buyers searching for a UTP A 2133 Mn TIG Rods importer, UTP A 2133 Mn stockist, UTP A 2133 Mn supplier or UTP A 2133 Mn exporter can contact SMSC to discuss required sizes, quantities, documentation and delivery requirements.
UTP A 2133 Mn is a high-alloyed TIG rod for joining and surfacing selected heat-resistant materials. Published product literature describes its use in petrochemical applications, including root welding of centrifugally cast pipes for service temperatures up to 1050°C depending on the atmosphere. Confirm suitability using the current manufacturer datasheet and approved welding procedure.
Quick Answer: What Are UTP A 2133 Mn TIG Rods?
UTP A 2133 Mn TIG Rods are high-alloyed filler rods classified as WZ 21 33 Mn Nb under EN ISO 14343. They are designed for joining and surfacing specified heat-resistant base materials. A typical application is root welding of centrifugally cast pipes in the petrochemical industry, with service temperatures up to 1050°C depending on the atmosphere.
Published typical weld-metal analysis includes chromium, nickel, manganese and niobium. The product literature also describes scale resistance up to 1050°C and good resistance to carburising atmospheres. Confirm the current datasheet, service conditions and welding procedure before selecting the filler rod.
UTP A 2133 Mn – Product Overview
UTP A 2133 Mn is a high-alloyed TIG rod in the heat-resistant welding consumables category. Its listed EN ISO classification is WZ 21 33 Mn Nb, with material number approximately 1.4850.
Product literature identifies it for joining and surfacing selected heat-resistant materials, including grades 1.4859, 1.4876 (UNS N08800), 1.4958 (UNS N08810) and 1.4959 (UNS N08811). Compatibility depends on the actual base material and service environment and must be confirmed before welding.
SMSC welcomes enquiries from engineering companies, industrial fabricators, maintenance contractors, distributors and project procurement teams. Share the required diameter, quantity, destination and technical specification to discuss your order.
UTP A 2133 Mn – Technical Specifications
The table below summarises product identification information and typical published values. Confirm the current manufacturer datasheet and batch documentation before technical acceptance or use.
| Property | Specification / Details |
|---|---|
| Product Name | UTP A 2133 Mn TIG Rods |
| Product Category | High-alloyed TIG rod for heat-resistant materials |
| Product Designation | UTP A 2133 Mn |
| Welding Process | TIG / GTAW |
| EN ISO Classification | EN ISO 14343 WZ 21 33 Mn Nb |
| Material Number | Approximately 1.4850 |
| AWS Classification | No AWS classification shown in the consulted product listing; verify current documentation. |
| Typical Chemical Analysis | C 0.12%, Si 0.3%, Mn 4.5%, Cr 21.0%, Ni 33.0%, Nb 1.2%, Fe balance |
| Typical Weld-Metal Properties | Yield strength 400 MPa; tensile strength 600 MPa; elongation 20%; impact strength 70 J at room temperature |
| Listed Rod Dimensions | 2.0 x 1000 mm, 2.4 x 1000 mm, 3.2 x 1000 mm |
| Current Availability | Confirm with SMSC before ordering |
| Supplier | Shanti Metal Supply Corporation (SMSC) |
UTP A 2133 Mn – Classification and Standards
The listed EN ISO 14343 classification for UTP A 2133 Mn is WZ 21 33 Mn Nb. The material number is approximately 1.4850. The consulted product listing does not provide an AWS classification, so the current manufacturer documentation should be checked where an AWS designation is required by a project specification.
| Verification Item | Product Information |
|---|---|
| Product Designation | UTP A 2133 Mn |
| EN ISO Classification | WZ 21 33 Mn Nb |
| Material Number | Approximately 1.4850 |
| AWS Classification | Not listed in the consulted product listing; check current datasheet. |
| Base-Metal Compatibility | Confirm the exact base material and approved welding procedure. |
| Inspection Documents | Confirm required datasheets, certificates and batch traceability before ordering. |
UTP A 2133 Mn – Chemical Composition
The published typical analysis for UTP A 2133 Mn is shown below. These figures are typical values from product literature, not a guarantee of the exact composition of every supplied batch.
| Element | Typical Analysis (%) |
|---|---|
| Carbon (C) | 0.12 |
| Silicon (Si) | 0.3 |
| Manganese (Mn) | 4.5 |
| Chromium (Cr) | 21.0 |
| Nickel (Ni) | 33.0 |
| Niobium (Nb) | 1.2 |
| Iron (Fe) | Balance |
UTP A 2133 Mn TIG Rods – Mechanical Properties
The product literature provides the following typical deposited weld-metal properties. Values can depend on test conditions and welding procedure, so verify the current manufacturer's datasheet for project acceptance.
| Property | Typical Value |
|---|---|
| Yield Strength (Rp0.2) | 400 MPa |
| Tensile Strength (Rm) | 600 MPa |
| Elongation (A) | 20% |
| Impact Strength (KV) | 70 J at room temperature |
Welding Parameters and Operating Recommendations
Published product instructions recommend thoroughly cleaning the weld area, using low heat input and keeping the maximum interpass temperature at 150°C. Listed TIG delivery recommendations include DC negative polarity and shielding gas I1 (argon). Confirm these instructions against the current datasheet and approved welding procedure.
| Parameter | Published Recommendation |
|---|---|
| Welding Process | GTAW / TIG |
| Current Type / Polarity | DC (−) |
| Shielding Gas | I1, argon, according to EN ISO 14175 |
| Heat Input | Low heat input recommended |
| Maximum Interpass Temperature | 150°C |
| Joint Preparation | Clean the weld area thoroughly before welding |
| Listed Rod Dimensions | 2.0 x 1000 mm; 2.4 x 1000 mm; 3.2 x 1000 mm |
Applications of UTP A 2133 Mn
UTP A 2133 Mn is intended for joining and surfacing heat-resistant base materials of identical or similar nature. Product literature identifies root welding of centrifugally cast pipes in the petrochemical industry as a typical application, with service temperatures up to 1050°C depending on the atmosphere.
- Material 1.4859: G X 10 NiCrNb 32 20.
- Material 1.4876: X 10 NiCrAlTi 32 21, UNS N08800.
- Material 1.4958: X 5 NiCrAlTi 31 20, UNS N08810.
- Material 1.4959: X 8 NiCrAlTi 31 21, UNS N08811.
- Petrochemical equipment: Root welding of centrifugally cast pipes where the material and welding procedure are approved.
- Heat-resistant components: Joining and surfacing work that matches manufacturer recommendations.
Product literature describes scale resistance up to 1050°C and good resistance to carburising atmospheres. Actual service suitability depends on the atmosphere, temperature and operating conditions. Obtain engineering approval before use.
Base-Material Compatibility
Filler-metal selection must be based on the exact base-metal grade, service environment and applicable fabrication code. The listed material combinations are a starting point for technical review, not blanket approval for every joint or operating condition.
- Confirm the base-metal grade and material certificate.
- Check the manufacturer's recommended filler-metal classification.
- Review the approved welding procedure and applicable code.
- Consider operating temperature, carburising atmosphere and service requirements.
- Confirm inspection, traceability and certification requirements before ordering.
Quality, Traceability and Documentation
Correct product identification and documentation are important when purchasing welding consumables for industrial projects. Communicate inspection and traceability requirements at the enquiry stage so they can be reviewed before an order is confirmed.
- Product designation and packaging identification.
- Applicable manufacturer technical datasheet.
- Batch identification and traceability requirements.
- Required test certificates or inspection documents, where applicable.
- Project-specific standards and acceptance criteria.
- Delivery destination, quantity and requested delivery schedule.
Storage and Handling of TIG Welding Rods
Proper storage and handling help protect filler rods from contamination and physical damage. Follow the manufacturer's instructions for the exact product and keep the rods identifiable throughout storage and use.
- Keep rods in their original packaging until required.
- Store the product in a clean and dry environment.
- Protect filler rods from oil, grease, dust and moisture.
- Check the product label and batch identification before use.
- Keep different grades clearly identified and separated.
- Follow site procedures for consumable handling and traceability.
Why Contact Shanti Metal Supply Corporation?
Shanti Metal Supply Corporation (SMSC) welcomes enquiries from industrial customers, welding contractors, fabricators, engineering firms and distributors seeking UTP A 2133 Mn TIG Rods. Contact our team to discuss product requirements, documentation and delivery arrangements.
- Enquiries for UTP A 2133 Mn TIG Rods and related welding consumables.
- Discussion of required diameters, quantities and destinations.
- Product specification and technical-documentation coordination.
- Support for industrial procurement and project enquiries.
- Communication with domestic and international buyers.
UTP A 2133 Mn TIG Rods Supplier for Worldwide Markets
SMSC welcomes enquiries for UTP A 2133 Mn TIG Rods from India, the Middle East, Asia-Pacific, Europe, Africa, North America and other international markets. Availability, lead time, documentation and shipping arrangements are confirmed according to each order.
UTP A 2133 Mn TIG Rods Supplier in the United Arab Emirates
Buyers in the UAE, including Dubai, Abu Dhabi, Sharjah and Ajman, can contact SMSC for UTP A 2133 Mn TIG Rods enquiries. Share the required designation, quantity, delivery location and technical documentation requirements.
UTP A 2133 Mn TIG Rods Supplier in Saudi Arabia
Industrial buyers and contractors in Saudi Arabia can enquire about UTP A 2133 Mn TIG Rods for approved heat-resistant welding requirements. Product suitability and availability should be confirmed before order placement.
UTP A 2133 Mn TIG Rods Supplier in Qatar
SMSC welcomes enquiries from Qatar, including Doha and other industrial locations. Buyers should provide the project specification, required quantity and documentation requirements.
UTP A 2133 Mn TIG Rods Supplier in Oman
Buyers in Oman, including Muscat and Sohar, can contact SMSC to discuss UTP A 2133 Mn TIG Rods supply enquiries. Confirm the product designation, sizes and delivery requirements with the team.
UTP A 2133 Mn TIG Rods Supplier in Kuwait
Procurement teams, engineering companies and welding contractors in Kuwait can submit enquiries for UTP A 2133 Mn TIG Rods. Include the required specification, quantity and project documentation requirements when requesting a quotation.
UTP A 2133 Mn TIG Rods Supplier in Bahrain
Industrial customers in Bahrain can contact SMSC for UTP A 2133 Mn TIG Rods enquiries. Confirm the classification, size, quantity, documentation and delivery requirements as part of the enquiry.
UTP A 2133 Mn TIG Rods Supplier in Indonesia
Buyers in Indonesia can enquire about UTP A 2133 Mn TIG Rods for industrial welding and fabrication requirements. Availability, documentation and shipping arrangements are confirmed according to the order.
UTP A 2133 Mn TIG Rods Supplier in Malaysia
SMSC welcomes enquiries from Malaysia, including industrial procurement teams, welding contractors and distributors. Provide the required specification and quantity for a supply discussion.
UTP A 2133 Mn TIG Rods Supplier in Singapore
Buyers in Singapore can contact SMSC regarding UTP A 2133 Mn TIG Rods. Confirm the applicable classification, documentation requirements, order quantity and destination before arranging supply.
UTP A 2133 Mn TIG Rods for Bangladesh and Sri Lanka
Fabricators, engineering firms and procurement teams in Bangladesh and Sri Lanka can submit enquiries. Share the product details and required delivery information so supply requirements can be reviewed.
UTP A 2133 Mn TIG Rods for Australia, New Zealand and Africa
International buyers in Australia, New Zealand and African markets can contact SMSC for UTP A 2133 Mn TIG Rods enquiries. Order acceptance, availability, shipping and documentation depend on the confirmed product requirements and destination.
How to Request a Quotation for UTP A 2133 Mn TIG Rods
To help process your enquiry, provide the following details:
- Complete product designation: UTP A 2133 Mn TIG Rods.
- Required classification and applicable standard.
- Required rod diameter and quantity.
- Project or application details, where relevant.
- Required certificates or technical documentation.
- Delivery destination and preferred delivery schedule.
- Special packing, inspection or traceability requirements.
Contact SMSC by phone or email to discuss your requirement and request current availability and quotation details.
Frequently Asked Questions About UTP A 2133 Mn TIG Rods
1. What are UTP A 2133 Mn TIG Rods?
UTP A 2133 Mn is a high-alloyed TIG rod for joining and surfacing selected heat-resistant materials. The listed classification is WZ 21 33 Mn Nb under EN ISO 14343.
2. Who supplies UTP A 2133 Mn TIG Rods?
Shanti Metal Supply Corporation (SMSC) welcomes enquiries for UTP A 2133 Mn TIG Rods. Contact SMSC to discuss availability, sizes, quantities and technical documentation.
3. What is the EN ISO classification of UTP A 2133 Mn?
The listed classification is EN ISO 14343 WZ 21 33 Mn Nb. Confirm the current product datasheet and project requirements before ordering.
4. What is the material number of UTP A 2133 Mn?
Published product literature identifies the material number as approximately 1.4850. Verify this against the current manufacturer documentation.
5. What is UTP A 2133 Mn used for?
It is used for joining and surfacing specified heat-resistant materials. A typical application is root welding of centrifugally cast pipes in the petrochemical industry.
6. What service temperature is mentioned for this product?
Product literature mentions service temperatures up to 1050°C depending on the atmosphere. Confirm the actual application limits with the manufacturer and responsible engineer.
7. Which base materials are listed for UTP A 2133 Mn?
Listed examples include materials 1.4859, 1.4876 (UNS N08800), 1.4958 (UNS N08810) and 1.4959 (UNS N08811). Confirm compatibility for the actual joint.
8. What is the typical chemical composition?
Published typical analysis is C 0.12%, Si 0.3%, Mn 4.5%, Cr 21.0%, Ni 33.0%, Nb 1.2% and Fe balance. Check the current datasheet and batch certificate for formal acceptance.
9. What are the typical mechanical properties?
Published typical values include 400 MPa yield strength, 600 MPa tensile strength, 20% elongation and 70 J impact strength at room temperature. Verify test conditions in the current manufacturer documentation.
10. Which diameters are listed for UTP A 2133 Mn TIG Rods?
Published product literature lists 2.0 mm, 2.4 mm and 3.2 mm rods in 1000 mm length. Confirm current stock and order availability with SMSC.
11. Which shielding gas and polarity are listed?
Published instructions list DC negative polarity and I1 argon shielding gas. Confirm these recommendations against the current datasheet and qualified welding procedure.
12. Can I request international supply?
SMSC welcomes enquiries from India, the Middle East, Southeast Asia and other international markets. Availability, documentation and delivery arrangements must be confirmed for each order.
