Thermanit 22/09 TIG Rods Importer, Stockist & Supplier Worldwide
Shanti Metal Supply Corporation (SMSC) welcomes industrial enquiries for Thermanit 22/09 TIG Rods. Buyers can contact us to discuss product identification, available sizes, quantities, documentation and supply requirements for welding, fabrication, maintenance and engineering projects.
Thermanit 22/09 is identified in manufacturer product information as a high-alloyed duplex stainless steel TIG filler rod. Product classification, base-metal compatibility and suitability for a particular service must be checked against the current manufacturer datasheet and qualified welding procedure.
Quick Answer: What Are Thermanit 22/09 TIG Rods?
Thermanit 22/09 TIG Rods are duplex stainless steel welding filler rods intended for TIG/GTAW welding applications. Manufacturer product listings identify the AWS classification as ER2209 and the EN ISO classification as W 22 9 3 N L. They are used for suitable joining and surfacing work involving matching or similar duplex stainless and cast-steel grades, subject to the applicable base material and welding procedure.
Thermanit 22/09 – Product Overview
Thermanit 22/09 is a high-alloyed duplex stainless steel TIG rod. Manufacturer information describes resistance to wet corrosion, pitting corrosion and stress-corrosion cracking in chloride-bearing environments. Chromium and molybdenum are important alloying elements in its corrosion-resistance profile. Always consult the current technical datasheet when selecting the filler metal for a particular application.
The manufacturer lists the product for joining and surfacing work on matching and similar austenitic-ferritic stainless and cast-steel grades. Its suitability depends on the base-metal grade, service conditions, joint design, welding parameters and required weld-metal properties. A qualified welding procedure and engineering review should guide final selection.
Thermanit 22/09 – Technical Specifications
The following table provides key identification details for buyers. Confirm exact supply condition, diameter, packaging, batch traceability and documentation with SMSC before placing an order.
| Property | Specification / Details |
|---|---|
| Product Name | Thermanit 22/09 TIG Rods |
| Product Category | TIG Welding Filler Rods |
| Product Designation | Thermanit 22/09 |
| Material Type | High-alloyed duplex stainless steel filler metal |
| Welding Process | TIG / GTAW; confirm application requirements from current documentation |
| AWS Classification | AWS A5.9 / SFA-5.9, ER2209 |
| EN ISO Classification | EN ISO 14343-A, W 22 9 3 N L |
| Typical Chemical Analysis | Refer to the chemical composition section and current manufacturer datasheet |
| Mechanical Properties | Confirm applicable deposited weld-metal test data from the current datasheet |
| Available Diameters | Confirm current diameter availability with SMSC |
| Packaging | Confirm packaging, quantity and batch identification when ordering |
| Supplier | Shanti Metal Supply Corporation (SMSC) |
Thermanit 22/09 – Classification and Standards
Welding consumable classifications help purchasers and welding engineers identify filler metals for a specific project. Manufacturer product listings identify Thermanit 22/09 as AWS A5.9 / SFA-5.9 ER2209 and EN ISO 14343-A W 22 9 3 N L. Always compare the designation on the supplied packaging and inspection documents with the project specification before use.
| Verification Item | What to Check |
|---|---|
| Product Designation | Confirm the full Thermanit 22/09 product name and batch identification. |
| AWS Classification | AWS A5.9 / SFA-5.9, ER2209; verify against the current datasheet. |
| EN ISO Classification | EN ISO 14343-A, W 22 9 3 N L; verify against current product documentation. |
| Base-Metal Compatibility | Check the base material, joint design, service environment and approved WPS. |
| Inspection Documents | Identify certificate, batch traceability and inspection-document requirements before ordering. |
Thermanit 22/09 – Chemical Composition
Published typical analysis for Thermanit 22/09 lists approximately 0.02% carbon, 0.4% silicon, 1.7% manganese, 22.5% chromium, 8.8% nickel, 3.2% molybdenum and 0.15% nitrogen by weight. These are typical analysis values and are not guaranteed acceptance limits. Confirm the current manufacturer datasheet and any batch-specific certificate for the material being supplied.
| Element | Typical Analysis (wt.%) |
|---|---|
| Carbon (C) | 0.02 |
| Silicon (Si) | 0.4 |
| Manganese (Mn) | 1.7 |
| Chromium (Cr) | 22.5 |
| Nickel (Ni) | 8.8 |
| Molybdenum (Mo) | 3.2 |
| Nitrogen (N) | 0.15 |
Thermanit 22/09 TIG Rods – Mechanical Properties
Mechanical properties of deposited weld metal can vary with the welding process, procedure, base metal, heat input, test method and test conditions. Do not rely on generic values when a project requires specified strength, elongation, impact performance or corrosion testing. Obtain applicable values from current manufacturer documentation and the approved welding procedure.
| Property | Technical Reference |
|---|---|
| Yield Strength | Confirm the specified value and test conditions from the current datasheet. |
| Tensile Strength | Confirm the specified value and test conditions from the current datasheet. |
| Elongation | Confirm the specified value and test conditions from the current datasheet. |
| Impact Properties | Verify applicable test temperature, method and acceptance criteria. |
| Corrosion Performance | Review manufacturer guidance for the actual service environment and base-metal grade. |
Welding Parameters and Operating Recommendations
Welding parameters for Thermanit 22/09 TIG Rods must be selected from the current product documentation and the qualified welding procedure. Avoid transferring current, polarity, shielding-gas or heat-input settings from a different filler metal without technical confirmation.
| Parameter | General Guidance |
|---|---|
| Welding Process | Confirm TIG / GTAW suitability and process instructions from the product documentation. |
| Current and Polarity | Follow the current manufacturer's recommendation and approved WPS. |
| Shielding Gas | Use the gas type and purity specified for the product and welding procedure. |
| Joint Preparation | Prepare the joint according to the approved procedure and applicable fabrication standard. |
| Surface Cleanliness | Remove oil, grease, moisture, scale and other contaminants before welding. |
| Heat Input | Follow qualified limits to maintain required weld-metal and joint performance. |
| Quality Checks | Complete inspection and testing required by the project specification. |
Applications of Thermanit 22/09 TIG Rods
Thermanit 22/09 is intended for appropriate duplex stainless steel welding applications. Final selection should be based on the material grades being joined, corrosion environment, design requirements and approved welding procedure.
- Joining and surfacing work involving matching or similar duplex stainless-steel grades.
- Fabrication projects where ER2209-type duplex filler metal is specified.
- Selected industrial equipment and process-system fabrication, subject to engineering approval.
- Maintenance and repair work where the approved welding procedure specifies the product.
- Industrial projects requiring traceable welding consumables and documented material identification.
Base-Material Compatibility
Before selecting Thermanit 22/09 TIG Rods, identify the base-metal designation, thickness, joint configuration, operating environment and required weld properties. Duplex stainless steels can require specific controls for heat input, interpass temperature and weld-metal structure. The applicable WPS and engineering review should establish the appropriate parameters.
- Confirm the base-metal grade and its material certificate.
- Check whether ER2209 is specified or approved for the joint.
- Review service temperature, corrosion exposure and mechanical requirements.
- Confirm pre-weld preparation, shielding, heat input and interpass controls.
- Ensure inspection and testing meet the project requirements.
Quality Control and Documentation
Industrial buyers should define the required documentation before ordering. SMSC can discuss documentation and traceability requirements as part of a product enquiry. Actual availability of specific certificates or inspection reports must be confirmed for the supplied lot.
- Product designation and classification verification.
- Batch or lot identification and traceability requirements.
- Manufacturer technical datasheet and applicable product documentation.
- Inspection certificates or test reports, where available and agreed.
- Quantity, packaging, delivery destination and project documentation requirements.
Storage and Handling
Keep TIG filler rods clean and protected from moisture, oil, grease, dust and other contaminants. Retain the original product identification and packaging information where possible. Follow the manufacturer's storage and handling instructions, and use only consumables that meet the project's quality requirements.
Thermanit 22/09 TIG Rods Supplier – Worldwide Enquiries
Shanti Metal Supply Corporation (SMSC) welcomes enquiries from industrial buyers, welding contractors, fabrication companies, engineering firms, maintenance teams and distributors looking for Thermanit 22/09 TIG Rods. Contact SMSC with your required quantity, diameter, destination and documentation needs so availability can be checked for your order.
Thermanit 22/09 TIG Rods Supplier in UAE, Dubai and Abu Dhabi
Buyers in the United Arab Emirates, including Dubai and Abu Dhabi, can contact SMSC for Thermanit 22/09 TIG rod enquiries. Share the required classification, diameter, quantity, delivery destination and technical-document requirements for an availability and quotation review.
Thermanit 22/09 TIG Rods Supplier in Saudi Arabia
Industrial procurement teams in Saudi Arabia can enquire about Thermanit 22/09 TIG rods for suitable welding and fabrication projects. Product selection and delivery arrangements should be confirmed against the project specification and current availability.
Thermanit 22/09 TIG Rods Supplier in Qatar
Buyers in Qatar can submit enquiries for Thermanit 22/09 TIG rods for approved industrial welding requirements. Include the base-metal grade, requested quantity and any inspection or traceability requirements.
Thermanit 22/09 TIG Rods Supplier in Oman
SMSC welcomes product enquiries from Oman, including industrial procurement teams seeking duplex stainless-steel TIG filler rods. Confirm the applicable product classification, availability and delivery requirements before placing an order.
Thermanit 22/09 TIG Rods Supplier in Kuwait and Bahrain
Customers in Kuwait and Bahrain can contact SMSC for product availability and quotation enquiries. Provide the full product designation, diameter, quantity and project documentation requirements.
Thermanit 22/09 TIG Rods Supplier in Indonesia
Fabricators, contractors and industrial buyers in Indonesia can enquire about Thermanit 22/09 TIG rods. Availability, packaging and delivery arrangements are confirmed individually for each enquiry.
Thermanit 22/09 TIG Rods Supplier in Malaysia
Buyers in Malaysia can contact SMSC to discuss Thermanit 22/09 TIG rod requirements for suitable fabrication and maintenance applications. Share your technical specification and delivery location when requesting a quote.
Thermanit 22/09 TIG Rods for Singapore and Other Asian Markets
Industrial buyers in Singapore and other Asian markets can submit enquiries for product specifications, availability and supply options. Enquiries from Thailand, Vietnam, the Philippines, Bangladesh and Sri Lanka can also be considered subject to order and delivery confirmation.
Thermanit 22/09 TIG Rods for Australia, New Zealand, Africa and Worldwide
SMSC welcomes international enquiries for Thermanit 22/09 TIG rods from Australia, New Zealand, African markets and other worldwide destinations. Please provide product requirements, quantity, destination and applicable documentation needs. International supply and delivery terms must be confirmed for each order.
How to Request a Quotation for Thermanit 22/09 TIG Rods
To help review your requirement, include the following details when contacting SMSC:
- Complete product designation: Thermanit 22/09 TIG Rods.
- Required AWS or EN ISO classification.
- Required diameter and quantity.
- Base-metal grade and intended welding application.
- Delivery destination and requested schedule.
- Certificate, inspection and traceability requirements.
Contact SMSC using the telephone numbers or email address provided on this page to discuss product availability and quotation details.
Frequently Asked Questions About Thermanit 22/09 TIG Rods
1. What are Thermanit 22/09 TIG Rods?
Thermanit 22/09 TIG Rods are high-alloyed duplex stainless-steel filler rods for suitable TIG/GTAW welding applications. Manufacturer product listings identify the AWS classification as ER2209 and the EN ISO classification as W 22 9 3 N L.
2. Who supplies Thermanit 22/09 TIG Rods?
Shanti Metal Supply Corporation (SMSC) welcomes enquiries for Thermanit 22/09 TIG rods. Contact SMSC to discuss current availability, sizes, quantities and technical documentation.
3. What is the AWS classification of Thermanit 22/09?
Manufacturer product information lists AWS A5.9 / SFA-5.9, ER2209. Confirm the classification against the current datasheet and product packaging before use.
4. What is the EN ISO classification of Thermanit 22/09?
The published EN ISO classification is EN ISO 14343-A, W 22 9 3 N L. Verify the current product documentation and supplied batch identification.
5. What is the chemical composition of Thermanit 22/09 TIG Rods?
Published typical analysis lists C 0.02%, Si 0.4%, Mn 1.7%, Cr 22.5%, Ni 8.8%, Mo 3.2% and N 0.15% by weight. These are typical values, not guaranteed limits; consult the current datasheet and applicable certificate.
6. Which sizes are available for Thermanit 22/09 TIG Rods?
Available diameters and packaging should be confirmed with SMSC. Include the required diameter and quantity when submitting an enquiry.
7. Can I request international supply of Thermanit 22/09 TIG Rods?
SMSC welcomes international enquiries, including from Gulf countries, Indonesia, Malaysia, Singapore and other markets. Availability and delivery arrangements must be confirmed for each order.
8. What information is needed to request a quotation?
Provide the product designation, classification, required diameter, quantity, destination country, base-metal grade and any certificate or inspection requirements.
9. How should TIG welding rods be stored?
Keep rods in clean, dry conditions, protect them from contamination and follow the manufacturer's handling and storage instructions.
Contact SMSC for Thermanit 22/09 TIG Rods
For Thermanit 22/09 TIG rod enquiries, contact Shanti Metal Supply Corporation (SMSC) with your required quantity, diameter, destination and technical documentation needs. Final product suitability should always be confirmed against the current manufacturer datasheet and the applicable welding procedure.