Thermanit 19/15 TIG Rods Importer, Stockist & Supplier Worldwide
Shanti Metal Supply Corporation (SMSC) is an importer, stockist, supplier and worldwide exporter supporting industrial procurement enquiries for Thermanit 19/15 TIG Rods. These high-alloyed austenitic stainless steel welding rods are used for compatible stainless steel joining and surfacing applications. SMSC supports enquiries from industrial customers, contractors, fabricators, distributors and project procurement teams in the Gulf region, Indonesia, Malaysia and other international markets.
Thermanit 19/15 is classified under AWS A5.9 / SFA-5.9 ER316LMn and EN ISO 14343-A W 20 16 3 Mn N L. Its alloy system includes chromium, nickel, molybdenum, manganese and nitrogen. The product is intended for suitable austenitic stainless steel welding applications where the specified corrosion performance and material compatibility are required.
Buyers looking for a Thermanit 19/15 TIG Rod importer, Thermanit 19/15 stockist, ER316LMn TIG Rod supplier or Thermanit 19/15 exporter can contact SMSC with the required diameter, quantity, destination country and technical documentation requirements.
Quick Answer: What Are Thermanit 19/15 TIG Rods?
Thermanit 19/15 TIG Rods are high-alloyed austenitic stainless steel filler rods designed for GTAW/TIG joining and surfacing of compatible austenitic chromium-nickel-manganese and chromium-nickel- molybdenum-manganese-nitrogen stainless steels and cast steel grades. The product is identified as ER316LMn under AWS A5.9 / SFA-5.9 and W 20 16 3 Mn N L under EN ISO 14343-A. The correct filler metal must be selected against the base material, welding procedure and operating environment.
Thermanit 19/15 TIG Rods – Product Overview
Thermanit 19/15 is a high-alloyed austenitic stainless steel TIG rod manufactured for specialized welding applications. Its manganese-rich alloy system distinguishes it from conventional 316L-type TIG filler rods. It is intended for welding compatible stainless steel materials where alloy compatibility and resistance to the specified service environment are important.
Manufacturer product information identifies this consumable for joining and surfacing applications involving matching and similar austenitic chromium-nickel-nitrogen and chromium-nickel-molybdenum-manganese-nitrogen steels, along with compatible cast steel grades. The material pairing should always be checked against the current manufacturer datasheet and the approved welding procedure.
The product is particularly associated with specialized corrosion-service applications, including certain equipment used in urea synthesis plants. Published product information also refers to seawater resistance and good resistance to nitric acid under suitable conditions. Actual performance depends on the chemical environment, temperature, fabrication quality, base-metal grade and welding procedure.
The manufacturer reference gives a maximum service temperature of approximately 350°C for the stated application context. This value should not be applied universally to every welded component. Verify the permitted service conditions against the current technical datasheet and project engineering requirements.
Thermanit 19/15 TIG Rods – Technical Specifications
| Property | Specification / Information |
|---|---|
| Product Name | Thermanit 19/15 TIG Rods |
| Brand | BÖHLER Welding / voestalpine Böhler Welding |
| Product Form | TIG Welding Rod |
| Product Category | High-Alloyed Austenitic Stainless Steel |
| Welding Process | Gas Tungsten Arc Welding (GTAW / TIG) |
| AWS Classification | AWS A5.9 / SFA-5.9 ER316LMn |
| EN ISO Classification | EN ISO 14343-A W 20 16 3 Mn N L |
| Alloy System | Chromium-Nickel-Molybdenum-Manganese-Nitrogen Stainless Steel |
| Current Type | DC Negative (DC−), according to product literature |
| Shielding Gas | I1 / Argon, according to the approved welding procedure |
| Typical Application | Joining and surfacing compatible austenitic stainless steels and cast steel grades |
| Service Temperature Reference | Up to approximately 350°C for the stated application context; verify current datasheet |
| Business Type | Importer, Stockist, Supplier & Worldwide Exporter |
Thermanit 19/15 – AWS and EN ISO Classification
Welding consumable classifications help procurement teams and welding engineers confirm that a product meets the intended filler-metal specification. Thermanit 19/15 is listed under the following standards.
| Standard | Classification | Identification |
|---|---|---|
| AWS A5.9 / SFA-5.9 | ER316LMn | High-alloyed stainless steel filler metal with a manganese-rich alloy system |
| EN ISO 14343-A | W 20 16 3 Mn N L | Solid wire or rod classification for compatible stainless steel welding applications |
The AWS and EN ISO designations belong to their respective classification systems. Check the current product label, technical datasheet and inspection documents to ensure that the specified designation matches the purchase order and welding procedure.
Thermanit 19/15 TIG Rods – Typical Chemical Composition
Published typical analysis identifies chromium, nickel, molybdenum, manganese and nitrogen as important alloying elements in Thermanit 19/15. The values below are typical reference figures, not guaranteed batch limits or substitute acceptance criteria.
| Element | Typical Content (wt.-%) | General Function |
|---|---|---|
| Carbon (C) | 0.02 | Low carbon content supports the intended low-carbon stainless steel filler-metal characteristics. |
| Silicon (Si) | 0.5 | Contributes to deoxidation and weld-metal processing characteristics. |
| Manganese (Mn) | 7.5 | A major alloying element in this manganese-rich austenitic filler metal. |
| Chromium (Cr) | 20.5 | Supports stainless steel corrosion resistance. |
| Molybdenum (Mo) | 2.8 | Contributes to resistance against localized corrosion in suitable environments. |
| Nickel (Ni) | 15.5 | Supports austenitic structure and contributes to weld-metal toughness. |
| Nitrogen (N) | 0.18 | Contributes to alloy strength and austenitic stainless steel characteristics. |
Mechanical Properties and Weld-Metal Performance
Mechanical properties for Thermanit 19/15 depend on the test conditions, welding procedure, shielding gas, dilution and condition of the deposited weld metal. Do not assume mechanical-property values from a different product variant or from Thermanit 19/15 H are applicable to Thermanit 19/15.
For applications where tensile strength, yield strength, elongation, impact toughness or hardness values are mandatory, request the current technical datasheet and confirm the applicable testing requirements. The required properties should be evaluated against the relevant design code and qualified welding procedure.
Welding Process and Operating Recommendations
Thermanit 19/15 is intended for gas tungsten arc welding (GTAW / TIG). Appropriate welding parameters should be selected by a qualified welding professional based on the base-metal grade, joint design, material thickness, service conditions and applicable welding code.
| Parameter | General Guidance |
|---|---|
| Welding Process | GTAW / TIG |
| Current Type | Direct current |
| Polarity | DC negative (DC−), as stated in product literature |
| Shielding Gas | I1 / Argon for the applicable procedure |
| Joint Preparation | Prepare the joint according to the qualified welding procedure. |
| Surface Cleanliness | Remove oil, grease, moisture and contaminants before welding. |
| Welding Parameters | Follow the approved WPS for current, travel speed, filler addition and gas flow. |
| Inspection | Complete the visual, nondestructive and other inspections required by the project specification. |
For corrosion-critical equipment, confirm that the base material and filler metal are compatible with the process fluid and operating temperature. Welding parameters should not be selected solely from general website information.
Applications of Thermanit 19/15 TIG Rods
Thermanit 19/15 is designed for specialized welding and surfacing work involving compatible high-alloy austenitic stainless steels. Its use should be based on the material specification and operating environment.
- Urea synthesis plants: Specialized welding applications where the specified stainless steel alloy system and corrosion requirements are compatible with the filler metal.
- Chemical processing equipment: Fabrication and maintenance of compatible corrosion-resistant equipment.
- Stainless steel piping: Welding of suitable stainless steel piping and process systems.
- Industrial vessels: Selected stainless steel vessels and equipment, subject to design and welding requirements.
- Petrochemical facilities: Specialized fabrication and maintenance applications where the material pairing is approved.
- Marine and seawater-related equipment: Selected applications where compatibility and actual corrosion conditions have been evaluated.
- Stainless steel castings: Joining or surfacing of compatible cast steel grades.
- Industrial maintenance: Repair work performed under an approved welding procedure.
Corrosion Resistance and Service Conditions
Manufacturer product information describes Thermanit 19/15 as suitable for certain demanding corrosion conditions, including specialized applications in urea synthesis plants. Product literature also refers to seawater resistance and good resistance to nitric acid under suitable conditions.
These descriptions do not mean that the filler metal is suitable for every concentration, temperature or chemical environment. Corrosion performance depends on the base metal, weld quality, heat input, surface condition, fabrication procedure, chemical concentration and service temperature. Engineering verification is necessary before use in critical equipment.
Storage, Handling and Quality Control
- Keep welding rods clean and protected from oil, grease, moisture and other contaminants.
- Store rods in suitable packaging and follow the manufacturer's handling instructions.
- Prevent contamination from carbon steel dust and other foreign materials.
- Check the product name, classification, size and batch identification before use.
- Maintain product traceability and inspection documents where required.
- Confirm certificates and project approvals before welding critical components.
- Follow the approved welding procedure and applicable quality-control plan.
Thermanit 19/15 TIG Rods Supplier for Gulf Countries
Shanti Metal Supply Corporation (SMSC) supports enquiries for Thermanit 19/15 TIG Rods from industrial buyers and project procurement teams in Gulf markets. Customers should specify the required classification, diameter, quantity, delivery destination and documentation needs when requesting availability or a quotation.
- Thermanit 19/15 TIG Rods Supplier in UAE
- Thermanit 19/15 TIG Rods Supplier in Dubai
- Thermanit 19/15 TIG Rods Supplier in Abu Dhabi
- Thermanit 19/15 TIG Rods Supplier in Sharjah
- Thermanit 19/15 TIG Rods Supplier in Ajman
- Thermanit 19/15 TIG Rods Supplier in Ras Al Khaimah
- Thermanit 19/15 TIG Rods Supplier in Saudi Arabia
- Thermanit 19/15 TIG Rods Supplier in Riyadh
- Thermanit 19/15 TIG Rods Supplier in Jeddah
- Thermanit 19/15 TIG Rods Supplier in Dammam
- Thermanit 19/15 TIG Rods Supplier in Jubail
- Thermanit 19/15 TIG Rods Supplier in Qatar
- Thermanit 19/15 TIG Rods Supplier in Doha
- Thermanit 19/15 TIG Rods Supplier in Oman
- Thermanit 19/15 TIG Rods Supplier in Muscat
- Thermanit 19/15 TIG Rods Supplier in Sohar
- Thermanit 19/15 TIG Rods Supplier in Kuwait
- Thermanit 19/15 TIG Rods Supplier in Kuwait City
- Thermanit 19/15 TIG Rods Supplier in Bahrain
- Thermanit 19/15 TIG Rods Supplier in Manama
Thermanit 19/15 TIG Rods Supplier in Indonesia and Malaysia
SMSC also supports international enquiries from Indonesia and Malaysia. Industrial buyers, fabrication companies, engineering contractors, maintenance companies, distributors and procurement teams can submit their requirements with the product designation, diameter, quantity, delivery destination and applicable technical documentation.
- Thermanit 19/15 TIG Rods Supplier in Indonesia
- Thermanit 19/15 TIG Rods Supplier in Jakarta
- Thermanit 19/15 TIG Rods Supplier in Surabaya
- Thermanit 19/15 TIG Rods Supplier in Malaysia
- Thermanit 19/15 TIG Rods Supplier in Kuala Lumpur
- Thermanit 19/15 TIG Rods Supplier in Johor Bahru
- Thermanit 19/15 TIG Rods Supplier in Penang
Thermanit 19/15 TIG Rods Supplier Worldwide
In addition to the Gulf region, Indonesia and Malaysia, SMSC supports international procurement enquiries from other markets, subject to product availability, commercial terms and applicable export requirements.
- Thermanit 19/15 TIG Rods Supplier in Singapore
- Thermanit 19/15 TIG Rods Supplier in Thailand
- Thermanit 19/15 TIG Rods Supplier in Vietnam
- Thermanit 19/15 TIG Rods Supplier in Philippines
- Thermanit 19/15 TIG Rods Supplier in Bangladesh
- Thermanit 19/15 TIG Rods Supplier in Sri Lanka
- Thermanit 19/15 TIG Rods Supplier in Japan
- Thermanit 19/15 TIG Rods Supplier in South Korea
- Thermanit 19/15 TIG Rods Supplier in Taiwan
- Thermanit 19/15 TIG Rods Supplier in Australia
- Thermanit 19/15 TIG Rods Supplier in New Zealand
- Thermanit 19/15 TIG Rods Supplier in South Africa
- Thermanit 19/15 TIG Rods Supplier in Nigeria
- Thermanit 19/15 TIG Rods Supplier in Kenya
- Thermanit 19/15 TIG Rods Supplier in Ghana
- Thermanit 19/15 TIG Rods Supplier in Tanzania
- Thermanit 19/15 TIG Rods Supplier in Morocco
- Thermanit 19/15 TIG Rods Supplier in Algeria
- Thermanit 19/15 TIG Rods Supplier worldwide
Why Choose Shanti Metal Supply Corporation (SMSC)?
- Importer, stockist and supplier for industrial welding consumables.
- Support for specification-based product enquiries.
- International enquiry support for Gulf countries.
- Additional enquiry support for Indonesia and Malaysia.
- Worldwide export enquiries subject to availability and export requirements.
- Support for bulk, industrial and project procurement requirements.
- Assistance identifying product classifications and technical requirements.
- Supply enquiries for welding fabrication, maintenance and engineering applications.
How to Order Thermanit 19/15 TIG Rods
To request product availability, pricing or a quotation from Shanti Metal Supply Corporation (SMSC), provide the following information so that your requirement can be reviewed accurately.
- Product Name: Thermanit 19/15 TIG Rods.
- Classification: ER316LMn / W 20 16 3 Mn N L.
- Required Diameter: Specify the diameter required for your welding procedure.
- Quantity: State the number of packs or total quantity.
- Destination: UAE, Saudi Arabia, Qatar, Oman, Kuwait, Bahrain, Indonesia, Malaysia or another country.
- Application: Specify the base material, welding application and project requirements.
- Documentation: Identify required certificates, inspection documents or technical approvals.
Need Thermanit 19/15 TIG Rods?
Contact Shanti Metal Supply Corporation (SMSC) for product availability, stock enquiries, quotations and international supply requirements for Thermanit 19/15 TIG Rods.
Send Your EnquiryFrequently Asked Questions – Thermanit 19/15 TIG Rods
1. What are Thermanit 19/15 TIG Rods?
Thermanit 19/15 TIG Rods are high-alloyed austenitic stainless steel welding rods designed for GTAW/TIG joining and surfacing applications involving compatible stainless steel materials.
2. What is the AWS classification of Thermanit 19/15?
The published AWS A5.9 / SFA-5.9 classification is ER316LMn. Confirm the product designation against the current manufacturer datasheet and supplied documentation.
3. What is the EN ISO classification of Thermanit 19/15?
The published EN ISO 14343-A classification is W 20 16 3 Mn N L.
4. What type of welding process is used?
Thermanit 19/15 is a TIG rod intended for gas tungsten arc welding, also known as GTAW or TIG welding.
5. What is the typical chemical composition of Thermanit 19/15?
Published typical analysis values include approximately 0.02% carbon, 0.5% silicon, 7.5% manganese, 20.5% chromium, 2.8% molybdenum, 15.5% nickel and 0.18% nitrogen by weight. These values are typical references and are not guaranteed batch limits.
6. What applications are associated with Thermanit 19/15?
The product is intended for joining and surfacing compatible austenitic stainless steels and cast steel grades. Manufacturer information also identifies specialized corrosion-service applications, including certain equipment used in urea synthesis plants.
7. Is Thermanit 19/15 suitable for seawater-related applications?
Manufacturer product information refers to seawater resistance. Actual suitability depends on the base material, water chemistry, temperature, component design and welding procedure.
8. What is the maximum service temperature?
The referenced product information gives approximately 350°C for the stated application context. Verify the applicable service limits against the current manufacturer datasheet and engineering requirements.
9. Who supplies Thermanit 19/15 TIG Rods worldwide?
Shanti Metal Supply Corporation (SMSC) supports industrial enquiries for Thermanit 19/15 TIG Rods, subject to product availability, commercial terms and destination requirements.
10. Can I enquire about Thermanit 19/15 TIG Rods in the UAE or Dubai?
Buyers in the UAE, Dubai, Abu Dhabi and other Gulf locations can submit international supply enquiries to SMSC with the required product classification, diameter, quantity and delivery destination.
11. Does SMSC support enquiries from Saudi Arabia, Qatar, Oman, Kuwait and Bahrain?
SMSC supports enquiries from these Gulf markets, subject to product availability, commercial terms and applicable export requirements. Buyers should provide their destination and project requirements.
12. Can buyers from Indonesia and Malaysia request a quotation?
Yes. Industrial buyers and procurement teams in Indonesia and Malaysia can submit their requirements, including product designation, size, quantity, delivery location and documentation needs.
13. What details should be included in a quotation request?
Include the product name, classification, required diameter, quantity, destination country, intended application and any certificate or inspection requirements.
Conclusion
Thermanit 19/15 TIG Rods are high-alloyed austenitic stainless steel welding consumables classified as ER316LMn under AWS A5.9 / SFA-5.9 and W 20 16 3 Mn N L under EN ISO 14343-A. They are designed for compatible stainless steel joining and surfacing applications, including selected specialized corrosion-service environments.
Shanti Metal Supply Corporation (SMSC) supports industrial procurement enquiries as an importer, stockist and supplier, with international enquiry support for Gulf countries, Indonesia, Malaysia and other worldwide markets, subject to availability and destination requirements.