Thermanit 16/05 Mo TIG Rods Importer, Stockist & Supplier Worldwide
Shanti Metal Supply Corporation (SMSC) welcomes enquiries for Thermanit 16/05 Mo TIG Rods, a high-alloyed, soft-martensitic stainless steel filler metal from Böhler Welding. The product is classified as W 16 5 1 under EN ISO 14343-A and is designed for compatible welding and repair applications involving selected martensitic stainless steels and cast steel grades.
Thermanit 16/05 Mo is used for applications such as propellers, pumps, valves and shafts manufactured from compatible materials. The manufacturer describes its weld metal as offering improved resistance to cracking compared with many other martensitic filler metals. Correct selection depends on the base material, service environment and approved welding procedure.
SMSC supports product enquiries from fabricators, industrial contractors, maintenance teams, distributors and project procurement departments in India, Gulf countries, Indonesia, Malaysia and other international markets. Availability and shipping arrangements are confirmed against each enquiry.
Quick Answer: What Are Thermanit 16/05 Mo TIG Rods?
Thermanit 16/05 Mo TIG rods are high-alloyed, soft-martensitic stainless steel filler rods classified as W 16 5 1 under EN ISO 14343-A. They are intended for compatible welding and repair applications involving materials such as 1.4028 X30Cr13, 1.4405 GX4CrNiMo16-5-1, 1.4418 X4CrNiMo16-5-1, AISI 420 and 248 SV, subject to confirmation against the current manufacturer documentation and approved welding procedure.
Thermanit 16/05 Mo TIG Rods – Product Overview
Thermanit 16/05 Mo is a martensitic stainless steel TIG rod designed for applications requiring compatible weld-metal properties and corrosion resistance. Its alloy system contains chromium, nickel and molybdenum. The product is associated with welding and repair work on selected propellers, pumps, valves, shafts and corresponding steels or castings.
The manufacturer indicates that the general and pitting corrosion resistance corresponds to that of 1.4301 / 304 stainless steel under the stated product conditions. Actual corrosion performance depends on the operating environment, surface condition, heat treatment and the materials being joined.
Thermanit 16/05 Mo TIG Rods Specifications
| Parameter | Specification / Typical Information |
|---|---|
| Product Name | Thermanit 16/05 Mo |
| Product Form | Solid TIG welding rod |
| Material Type | High-alloyed, soft-martensitic stainless steel filler metal |
| EN ISO Classification | EN ISO 14343-A W 16 5 1 |
| AWS Classification | Not listed in the cited manufacturer datasheet; confirm with the current manufacturer documentation |
| Welding Process | GTAW / TIG |
| Polarity | DC negative (DC−) |
| Shielding Gas | I1 under EN ISO 14175 |
| Rod Marking | W 16 5 1 |
| Listed Diameter | 2.4 mm |
| Listed Length | 1000 mm |
| Typical Heat Input Limit | Maximum 2.0 kJ/mm, as specified in the cited datasheet |
| Maximum Interpass Temperature | 150°C, as specified in the cited datasheet |
| Manufacturer Listed Approvals | No approvals listed in the cited datasheet |
EN ISO Classification of Thermanit 16/05 Mo
The manufacturer lists Thermanit 16/05 Mo as W 16 5 1 under EN ISO 14343-A. The classification identifies the relevant stainless steel filler-metal family. Purchasers should confirm the applicable standard, material compatibility and any project-specific requirements before approving the consumable.
| Reference | Classification / Detail | Purpose |
|---|---|---|
| EN ISO 14343-A | W 16 5 1 | Manufacturer-listed classification for the TIG rod. |
| Manufacturer Datasheet | Thermanit 16/05 Mo | Reference for typical chemistry, operating data and applications. |
| Welding Procedure Specification | Project-specific | Defines approved welding parameters, preheat and heat treatment. |
| Batch Documentation | As required by the purchase order | Supports traceability and inspection requirements. |
Chemical Composition of Thermanit 16/05 Mo
The following values are the typical analysis published for Thermanit 16/05 Mo. They are typical composition values, not a guaranteed batch analysis or acceptance range. Refer to the current manufacturer datasheet and batch documentation for formal quality requirements.
| Chemical Element | Typical Content (wt.-%) | General Role |
|---|---|---|
| Carbon (C) | 0.02 | Influences hardenability and the resulting weld-metal structure. |
| Silicon (Si) | 0.40 | Contributes to deoxidation and weld-metal characteristics. |
| Manganese (Mn) | 1.4 | Contributes to deoxidation and metallurgical properties. |
| Chromium (Cr) | 16.0 | Contributes to stainless corrosion resistance. |
| Nickel (Ni) | 5.5 | Contributes to the alloy's metallurgical and mechanical properties. |
| Molybdenum (Mo) | 1.0 | Contributes to the alloy's corrosion and metallurgical characteristics. |
Mechanical Properties of Thermanit 16/05 Mo Weld Metal
The cited manufacturer datasheet provides typical all-weld-metal properties in the annealed condition. These values are provided for technical reference and must not replace the current datasheet, batch test results or applicable project acceptance criteria.
| Property | Annealed Condition | Listed Minimum Value |
|---|---|---|
| Yield Strength (Rp0.2) | 460 MPa typical | ≥ 400 MPa |
| Tensile Strength (Rm) | 840 MPa typical | ≥ 600 MPa |
| Elongation (A, L0 = 5d0) | ≥ 15% | ≥ 15% |
| Impact Energy ISO-V at 20°C | 60 J typical | ≥ 32 J |
| Hardness | 260 HB (as listed) | Not separately stated in the cited table |
The cited annealed-condition values are associated with 100% argon shielding and heat treatment at 590°C for four hours, followed by air cooling. Follow the manufacturer's current instructions and the approved welding procedure for the actual component.
Base Materials for Thermanit 16/05 Mo
The manufacturer lists Thermanit 16/05 Mo for compatible martensitic stainless steels and castings. The following material designations appear in the product datasheet. Verify the exact base-metal grade and welding suitability before use.
| Material Number / Grade | Material Designation | Material Family |
|---|---|---|
| 1.4028 | X30Cr13 | Martensitic stainless steel |
| 1.4405 | GX4CrNiMo16-5-1 | Martensitic stainless cast steel |
| 1.4418 | X4CrNiMo16-5-1 | Martensitic stainless steel |
| AISI 420 | AISI 420 | Martensitic stainless steel |
| 248 SV | 248 SV | Listed compatible steel grade |
Applications of Thermanit 16/05 Mo
Thermanit 16/05 Mo is intended for suitable joining and repair applications where the base metal, weld-metal properties and service conditions are compatible with the product.
- Repair and welding of compatible propellers.
- Welding and maintenance of suitable pump components.
- Repair of compatible valve bodies and related parts.
- Joining and repair of suitable shafts.
- Fabrication involving listed martensitic stainless steels.
- Repair of compatible stainless steel castings.
- Industrial maintenance requiring a matching martensitic stainless filler metal.
- Applications where corrosion resistance and crack resistance are specified by the engineering procedure.
Advantages of Thermanit 16/05 Mo TIG Rods
- Product-specific classification: Listed as W 16 5 1 under EN ISO 14343-A.
- Martensitic stainless steel filler: Developed for compatible steels and castings in the intended alloy family.
- Crack-resistance characteristics: The manufacturer describes improved cracking resistance compared with many other martensitic filler types.
- Corrosion performance: The manufacturer states that general and pitting corrosion resistance corresponds to 1.4301 / 304 under the stated conditions.
- Repair applications: Suitable for specified propeller, pump, valve and shaft welding or repair work.
- TIG process control: GTAW supports controlled filler-metal deposition when performed by qualified personnel.
Welding Parameters for Thermanit 16/05 Mo
Welding conditions must be selected according to the base metal, thickness, restraint, service requirements and approved welding procedure. The table below summarizes operating information in the cited manufacturer datasheet.
| Parameter | Manufacturer Guidance |
|---|---|
| Welding Process | GTAW / TIG |
| Polarity | DC negative (DC−) |
| Shielding Gas | I1 under EN ISO 14175 |
| Listed Rod Size | 2.4 mm × 1000 mm |
| Suggested Maximum Heat Input | 2.0 kJ/mm |
| Maximum Interpass Temperature | 150°C |
| Normal Preheating | Normally not necessary, according to the cited datasheet |
| Preheating for Thick Materials / High Stress | 75–100°C is recommended in the cited datasheet |
| Recommended Post-Weld Heat Treatment | 590°C for 4 hours, followed by air cooling |
Preheating and Post-Weld Heat Treatment
The manufacturer states that preheating is normally unnecessary for Thermanit 16/05 Mo. For thick materials where high stresses can be expected, the cited datasheet recommends preheating to 75–100°C. It also recommends post-weld heat treatment for four hours at 590°C, followed by air cooling, to help stabilize the structure and reduce brittle martensite.
- Confirm the base-metal grade and component thickness before welding.
- Follow the qualified WPS for heat input and interpass temperature.
- Use the prescribed post-weld heat treatment when required by the approved procedure.
- Ensure that any heat treatment is compatible with the component's design and service requirements.
- Arrange required inspection and traceability documentation for critical applications.
Storage and Handling of Thermanit 16/05 Mo
- Keep rods in their original packaging until required for use.
- Store consumables in a clean and dry location.
- Protect rods from oil, grease, moisture and other contaminants.
- Use clean filler rods and suitable handling practices during welding.
- Follow the manufacturer's storage and handling instructions.
- Maintain product and batch identification where required by the project.
Thermanit 16/05 Mo TIG Rods Supplier and Exporter Worldwide
Shanti Metal Supply Corporation welcomes enquiries from industrial customers, welding contractors, maintenance teams, fabricators, distributors and project procurement departments seeking Thermanit 16/05 Mo TIG rods. Customers can share the requested classification, diameter, quantity, destination and documentation requirements to check availability and supply options.
For an accurate quotation, provide the required product designation, applicable standard, rod dimensions, quantity, delivery destination and any inspection or traceability requirements. Supply, lead time and shipping arrangements are confirmed individually for each order.
Thermanit 16/05 Mo TIG Rods Supplier for Gulf Countries
SMSC welcomes product enquiries from buyers and procurement teams across the Gulf region. Customers in the United Arab Emirates, Saudi Arabia, Qatar, Oman, Kuwait and Bahrain can submit their specifications and delivery requirements for an availability check.
When enquiring from Gulf countries, mention the applicable material specification, required rod size, quantity, delivery city and documentation needs. International shipping and availability are subject to confirmation for each order.
Thermanit 16/05 Mo TIG Rods Supplier in Indonesia and Malaysia
SMSC also welcomes enquiries from Indonesia and Malaysia for Thermanit 16/05 Mo TIG rods. Industrial buyers can submit their welding consumable requirements, material specifications, quantities and destination details for quotation and availability confirmation.
Product supply and delivery depend on availability, order conditions, destination requirements and shipping arrangements. Always confirm the required classification and technical details before ordering.
Why Choose Shanti Metal Supply Corporation?
- Support for industrial welding consumable procurement enquiries.
- Assistance with product identification and classification checks.
- Quotation coordination based on required grade, size and quantity.
- Discussion of documentation and traceability requirements at enquiry stage.
- Support for buyers in India and international markets.
- Communication with fabricators, contractors, distributors and maintenance teams.
How to Order Thermanit 16/05 Mo TIG Rods
Include the following details when requesting a quotation:
- Product designation: Thermanit 16/05 Mo.
- Classification: EN ISO 14343-A W 16 5 1.
- Required diameter and rod length.
- Quantity and packaging requirements.
- Delivery city and country.
- Certificate, inspection and traceability requirements.
- Base material and application details, where available.
Contact SMSC through the website's contact page to enquire about current availability, lead time and quotation terms.
BThermanit 16/05 Mo TIG Rods Supplier for Gulf Countries
SMSC has a particular supply focus on the countries, supporting industrial welding and fabrication requirements for power-generation, oil and gas, petrochemical, pressure-equipment, piping, engineering and maintenance projects.
- BThermanit 16/05 Mo TIG Rods Supplier in UAE
- BThermanit 16/05 Mo TIG Rods Supplier in Dubai
- BThermanit 16/05 Mo TIG Rods Supplier in Abu Dhabi
- BThermanit 16/05 Mo TIG Rods Supplier in Saudi Arabia
- BThermanit 16/05 Mo TIG Rods Supplier in Qatar
- BThermanit 16/05 Mo TIG Rods Supplier in Oman
- BThermanit 16/05 Mo TIG Rods Supplier in Kuwait
- BThermanit 16/05 Mo TIG Rods Supplier in Bahrain
- BThermanit 16/05 Mo TIG Rods Supplier in Singapore
- BThermanit 16/05 Mo TIG Rods Supplier in Malaysia
- BThermanit 16/05 Mo TIG Rods Supplier in Indonesia
- BThermanit 16/05 Mo TIG Rods Supplier in Thailand
- BThermanit 16/05 Mo TIG Rods Supplier in Vietnam
- BThermanit 16/05 Mo TIG Rods Supplier in Philippines
- BThermanit 16/05 Mo TIG Rods Supplier in Bangladesh
- BThermanit 16/05 Mo TIG Rods Supplier in Sri Lanka
- BThermanit 16/05 Mo TIG Rods Supplier in Japan
- BThermanit 16/05 Mo TIG Rods Supplier in South Korea
- BThermanit 16/05 Mo TIG Rods Supplier in Taiwan
- BThermanit 16/05 Mo TIG Rods Supplier in Australia
- BThermanit 16/05 Mo TIG Rods Supplier in New Zealand
- BThermanit 16/05 Mo TIG Rods Supplier in South Africa
- BThermanit 16/05 Mo TIG Rods Supplier in Nigeria
- BThermanit 16/05 Mo TIG Rods Supplier in Kenya
- BThermanit 16/05 Mo TIG Rods Supplier in Ghana
- BThermanit 16/05 Mo TIG Rods Supplier in Tanzania
- BThermanit 16/05 Mo TIG Rods Supplier in Morocco
- BThermanit 16/05 Mo TIG Rods Supplier in Algeria
Frequently Asked Questions About Thermanit 16/05 Mo TIG Rods
1. What are Thermanit 16/05 Mo TIG Rods?
Thermanit 16/05 Mo is a high-alloyed, soft-martensitic stainless steel TIG rod intended for compatible welding and repair applications involving selected steels and castings.
2. What is the EN ISO classification of Thermanit 16/05 Mo?
The manufacturer lists the product as W 16 5 1 under EN ISO 14343-A.
3. What is the AWS classification of Thermanit 16/05 Mo?
The cited manufacturer datasheet does not list an AWS classification for this TIG rod. Check the current manufacturer documentation for the applicable classification rather than assuming an equivalent.
4. What is the typical chemical composition?
The typical analysis is 0.02% carbon, 0.40% silicon, 1.4% manganese, 16.0% chromium, 5.5% nickel and 1.0% molybdenum by weight. These are typical values and not batch-specific guarantees.
5. Which base materials are listed for Thermanit 16/05 Mo?
The cited datasheet lists 1.4028 X30Cr13, 1.4405 GX4CrNiMo16-5-1, 1.4418 X4CrNiMo16-5-1, AISI 420 and 248 SV. Confirm suitability for the actual component and service conditions.
6. What are the listed rod dimensions?
The cited datasheet lists a rod dimension of 2.4 mm × 1000 mm. Confirm the currently available dimensions when requesting a quotation.
7. What shielding gas is specified?
The cited datasheet specifies shielding gas I1 under EN ISO 14175. Follow the current manufacturer's instructions and the approved welding procedure.
8. What is the recommended heat input?
The cited datasheet suggests a maximum heat input of 2.0 kJ/mm and a maximum interpass temperature of 150°C. Apply these values only after checking the applicable welding procedure.
9. Is preheating required for Thermanit 16/05 Mo?
The cited datasheet states that preheating is normally unnecessary. For thick materials where high stresses can be expected, it recommends 75–100°C. Confirm the actual requirement against the parent metal and qualified procedure.
10. What post-weld heat treatment is recommended?
The cited datasheet recommends 590°C for four hours followed by air cooling. Verify the current product instructions and approved welding procedure before applying this cycle.
11. Can customers in Gulf countries enquire about this product?
SMSC welcomes enquiries from the UAE, Saudi Arabia, Qatar, Oman, Kuwait, Bahrain and other markets. Availability and delivery arrangements are confirmed for each order.
12. Can customers in Indonesia and Malaysia enquire about Thermanit 16/05 Mo?
Yes. SMSC welcomes enquiries from Indonesia and Malaysia, subject to product availability and shipping arrangements.
13. How can I request a quotation?
Provide the product designation, EN ISO classification, rod dimensions, quantity, delivery destination and documentation requirements through the SMSC contact page.
Our Other Welding Consumables
SMSC welcomes enquiries for other welding consumables as well. Refer to the relevant product pages for technical specifications and current availability.
Conclusion
Thermanit 16/05 Mo is a high-alloyed, soft-martensitic stainless steel TIG rod classified as W 16 5 1 under EN ISO 14343-A. It is intended for suitable welding and repair work involving compatible martensitic stainless steels and castings, including specified propeller, pump, valve and shaft applications. Shanti Metal Supply Corporation welcomes enquiries from industrial customers and procurement teams seeking availability and supply information. Confirm the current manufacturer datasheet, base-metal compatibility and approved welding procedure before selecting or using the consumable.